Dryer
Beads discharged from the preexpander may contain up to 10% of water as they have been treated by steam. Such beads are moist and not loose enough to be transported by air, and it may take a long time for natural drying. Therefore, it is advisable to use a drying machine to accelerate the stabilization of beads after preexpansion and remove excess moisture from the beads. After drying, the beads are transported by an air fan to silo hoppers. .
Specifications
Parameter
|
Value *
|
Rated capacity per cycle, cub.m |
1,0
|
Machine capacity, cub.m/hour/час |
до 15
|
Bulk weight of beads, kg/cub.m |
8...40
|
Dimensions including fans, mm |
5500х800х1000
|
Weight, kg |
130
|
Serviced by, operators |
1
|
Electric specifications
|
Supply current type |
alternating, three-phase
|
Rated current frequency, Hz |
50
|
Rated supply voltage, V |
380
|
Rated power of heating elements, kW |
max 9
|
Rated power of air supply fan, kW |
2,2
|
Remark: *The specifications are applicable to max EPS density of 20 kg/cub.m.. |
Photo
