Prebreaker/grinder
It is a hammer grinder where grinding is made possible by means of rotating hammers fixedly attached to a horizontal axis. When ground beads reach the size of the mesh openings (8...10 mm), regranulate is fed by suction to the storage bin. |
The grinder is designed for EPS lump scrap granulation.Specification
Parameter | Value |
| Grinder type | hammer |
| Maximum output, m3/hour | 3,0 |
| Charge socket section, mm | 500 х 100 |
| Bulk weight of EPS processed, kg/m3 | 9...50 |
| Input speed, rpm | 1460 |
| Service norm, persons | 1 |
| Regranulate fraction, mm | 8* |
| Dimensions (width / length / height), mm | 800 х 1220 х 750 |
| Weight, kg | 180 |
Power specification | |
| Supply current | alternating three-phase |
| Current frequency rating, Hz | 50 |
| Nominal circuit voltage, V | 380 |
| Drive rating, kW | 4 |
| Note: * The grinder must be eqipped with a forced suction mechanism to draw off EPS regranulate. A suction fan specially designed by our company suits this purpose well. | |
